* fix: redis sentinel secret missing
* refactor: use consts for authentication_backend.file.password errs
* fix: unit test for new default port
* test: cover additional misses
* test: fix windows/linux specific test error
* test: more windows specific tests
* test: remove superfluous url.IsAbs
* test: validator 100% coverage
* add new directive in the global scope `certificates_directory` which is used to bulk load certs and trust them in Authelia
* this is in ADDITION to system certs and are trusted by both LDAP and SMTP
* added a shared TLSConfig struct to be used by both SMTP and LDAP, and anything else in the future that requires tuning the TLS
* remove usage of deprecated LDAP funcs Dial and DialTLS in favor of DialURL which is also easier to use
* use the server name from LDAP URL or SMTP host when validating the certificate unless otherwise defined in the TLS section
* added temporary translations from the old names to the new ones for all deprecated options
* added docs
* updated example configuration
* final deprecations to be done in 4.28.0
* doc updates
* fix misc linting issues
* uniform deprecation notices for ease of final removal
* added additional tests covering previously uncovered areas and the new configuration options
* add non-fatal to certificate loading when system certs could not be loaded
* adjust timeout of Suite ShortTimeouts
* add warnings pusher for the StructValidator
* make the schema suites uninform
* utilize the warnings in the StructValidator
* fix test suite usage for skip_verify
* extract LDAP filter parsing into it's own function to make it possible to test
* test LDAP filter parsing
* update ErrorContainer interface
* add tests to the StructValidator
* add NewTLSConfig test
* move baseDN for users/groups into parsed values
* add tests to cover many of the outstanding areas in LDAP
* add explicit deferred LDAP conn close to UpdatePassword
* add some basic testing to SMTP notifier
* suggestions from code review
* add start_tls config option
* add StartTLS method to the LDAP conn factory and the mock
* implemented use of the StartTLS method when the config is set to true
* add mock unit tests
* add docs
* add TLS min version support
* add tests to tls version method
* fix lint issues
* minor adjustments
* remove SSL3.0
* add tls consts
* deprecate old filter placeholders
* remove redundant fake hashing in file auth provider (to delay username enumeration, was replaced by #993
* make suite ActiveDirectory use StartTLS
* misc adjustments to docs
* suggested changes from code review
* deprecation notice conformity
* add mock test for LDAPS plus StartTLS
* [BUGFIX] Make username_attribute a mandatory placeholder in users_filter
Not including the `username_attribute` in the `users_filter` will cause issues with the LDAP session refresh and will result in session resets when the refresh interval has expired.
This change makes said attribute mandatory for the `users_filter`.
* Update version referenced in docs for fix
* Added `ActiveDirectory` suite for integration tests with Samba AD
* Updated documentation
* Minor styling refactor to suites
* Clean up LDAP user provisioning
* Fix Authelia home splash to reference correct link for webmail
* Add notification message for password complexity errors
* Add password complexity integration test
* Rename implementation default from rfc to custom
* add specific defaults for LDAP (activedirectory implementation)
* add docs to show the new defaults
* add docs explaining the importance of users filter
* add tests
* update instances of LDAP implementation names to use the new consts where applicable
* made the 'custom' case in the UpdatePassword method for the implementation switch the default case instead
* update config examples due to the new defaults
* apply changes from code review
* replace schema default name from MSAD to ActiveDirectory for consistency
* fix missing default for username_attribute
* replace test raising on empty username attribute with not raising on empty
Co-authored-by: James Elliott <james-d-elliott@users.noreply.github.com>
* [FEATURE] Add configurable display name to frontend
This feature allows users with a LDAP backend to specify an attribute (default is "displayname") to retrieve a users name for the portal greeting.
Similarly for the file based backend a new required key "name" has been introduced.
This can also be used down the line with OIDC as a separate scope.
* Update references from Name to DisplayName
* Update compose bundles to include displayname refs
* Update LDAP automatic profile refresh
* Ensure display name is updated
* Fix bug which prevented trace logging for profile refresh to not trigger
* using authelia hash-password if you provide a salt it doesn't encode it as a base64 string
* this causes invalid salts to be stored if a user manually provided one instead of reliance on the automatic generation
* additionally bumped the minimum required salt length to 8 as per reference spec
* additionally removed the maximum salt length as per reference spec (actually 2^32-1 per int32)
* see docs:
* https://tools.ietf.org/html/draft-irtf-cfrg-argon2-10
* https://github.com/P-H-C/phc-winner-argon2
* https://github.com/P-H-C/phc-string-format
* encode all salts
* fix edge case of false positive in CheckPassword
* bump crypt version and fix tests
* [FIX] LDAP Not Checking for Updated Groups
* refactor handlers verifyFromSessionCookie
* refactor authorizer selectMatchingObjectRules
* refactor authorizer isDomainMatching
* add authorizer URLHasGroupSubjects method
* add user provider ProviderType method
* update tests
* check for new LDAP groups and update session when:
* user provider type is LDAP
* authorization is forbidden
* URL has rule with group subjects
* Implement Refresh Interval
* add default values for LDAP user provider
* add default for refresh interval
* add schema validator for refresh interval
* add various tests
* rename hasUserBeenInactiveLongEnough to hasUserBeenInactiveTooLong
* use Authelia ctx clock
* add check to determine if user is deleted, if so destroy the
* make ldap user not found error a const
* implement GetRefreshSettings in mock
* Use user not found const with FileProvider
* comment exports
* use ctx.Clock instead of time pkg
* add debug logging
* use ptr to reference userSession so we don't have to retrieve it again
* add documenation
* add check for 0 refresh interval to reduce CPU cost
* remove badly copied debug msg
* add group change delta message
* add SliceStringDelta
* refactor ldap refresh to use the new func
* improve delta add/remove log message
* fix incorrect logic in SliceStringDelta
* add tests to SliceStringDelta
* add always config option
* add tests for always config option
* update docs
* apply suggestions from code review
Co-Authored-By: Amir Zarrinkafsh <nightah@me.com>
* complete mocks and fix an old one
* show warning when LDAP details failed to update for an unknown reason
* golint fix
* actually fix existing mocks
* use mocks for LDAP refresh testing
* use mocks for LDAP refresh testing for both added and removed groups
* use test mock to verify disabled refresh behaviour
* add information to threat model
* add time const for default Unix() value
* misc adjustments to mocks
* Suggestions from code review
* requested changes
* update emails
* docs updates
* test updates
* misc
* golint fix
* set debug for dev testing
* misc docs and logging updates
* misc grammar/spelling
* use built function for VerifyGet
* fix reviewdog suggestions
* requested changes
* Apply suggestions from code review
Co-authored-by: Amir Zarrinkafsh <nightah@me.com>
Co-authored-by: Clément Michaud <clement.michaud34@gmail.com>
* add a nolint for gosec 'possibly hardcoded password' that was incorrect
* make all parameters consistent
* update the docs for the correct key name 'password' instead of 'password_options' or 'password_hashing'
* reword some of the docs
* apply suggestions from code review
Co-Authored-By: Amir Zarrinkafsh <nightah@me.com>
* [FEATURE] Disable Reset Password
* add configuration key to authentication_backend called disable_reset_password
* disable_reset_password prevents the API handler for the functionality and the UI element
* disable_reset_password is a boolean
* adjust RememberMeEnabled to be RememberMe instead as it's just unnecessary
* add docs for security measures and in the authentication docs
* updated config.template.yml
* add flexEnd style to align reset password when remember me disabled
* add todo items for ldap user/password validation relating to this
* [FEATURE][BREAKING] Allow users to sign in with email.
The users_filter purpose evolved with the introduction of username_attribute
but is reverted here to allow the most flexibility. users_filter is now the
actual filter used for searching the user and not a sub-filter based on the
username_attribute anymore.
* {input} placeholder has been introduced to later deprecate {0} which has been
kept for backward compatibility.
* {username_attribute} and {mail_attribute} are new placeholders used to back
reference other configuration options.
Fix#735
* [MISC] Introduce new placeholders for groups_filter too.
* [MISC] Update BREAKING.md to mention the change regarding users_filter.
* [MISC] Fix unit and integration tests.
* Log an error message in console when U2F is not supported.
* Apply suggestions from code review
* Update BREAKING.md
Co-authored-by: James Elliott <james-d-elliott@users.noreply.github.com>
Co-authored-by: Amir Zarrinkafsh <nightah@me.com>
* [BUGFIX] Set username retrieved from authentication backend in session.
In some setups, binding is case insensitive but Authelia is case
sensitive and therefore need the actual username as stored in the
authentication backend in order for Authelia to work correctly.
Fixes#561.
* Use uid attribute as unique user identifier in suites.
* Fix the integration tests.
* Update config.template.yml
* Compute user filter based on username attribute and users_filter.
The filter provided in users_filter is now combined with a filter
based on the username attribute to perform the LDAP search query
finding a user object from the username.
* Fix LDAP based integration tests.
* Update `users_filter` reference examples
* [FEATURE] Support Argon2id Passwords
- Updated go module github.com/simia-tech/crypt
- Added Argon2id support for file based authentication backend
- Made it the default method
- Made it so backwards compatibility with SHA512 exists
- Force seeding of the random string generator used for salts to ensure they are all different
- Added command params to the authelia hash-password command
- Automatically remove {CRYPT} from hashes as they are updated
- Automatically change hashes when they are updated to the configured algorithm
- Made the hashing algorithm parameters completely configurable
- Added reasonably comprehensive test suites
- Updated docs
- Updated config template
* Adjust error output
* Fix unit test
* Add unit tests and argon2 version check
* Fix new unit tests
* Update docs, added tests
* Implement configurable values and more comprehensive testing
* Added cmd params to hash_password, updated docs, misc fixes
* More detailed error for cmd, fixed a typo
* Fixed cmd flag error, minor refactoring
* Requested Changes and Minor refactoring
* Increase entropy
* Update docs for entropy changes
* Refactor to reduce nesting and easier code maintenance
* Cleanup Errors (uniformity for the function call)
* Check salt length, fix docs
* Add Base64 string validation for argon2id
* Cleanup and Finalization
- Moved RandomString function from ./internal/authentication/password_hash.go to ./internal/utils/strings.go
- Added SplitStringToArrayOfStrings func that splits strings into an array with a fixed max string len
- Fixed an error in validator that would allow a zero salt length
- Added a test to verify the upstream crypt module supports our defined random salt chars
- Updated docs
- Removed unused "HashingAlgorithm" string type
* Update crypt go mod, support argon2id key length and major refactor
* Config Template Update, Final Tests
* Use schema defaults for hash-password cmd
* Iterations check
* Docs requested changes
* Test Coverage, suggested edits
* Wording edit
* Doc changes
* Default sanity changes
* Default sanity changes - docs
* CI Sanity changes
* Memory in MB
